Hanger With Lock
Anchor type suspender for attaching hanger wires to Knauf CD channels. Designed exclusively to be used with Knauf D11 Ceiling System. (Load bearing capacity class = 25 kg.)
Wire With Eyelet (Hanging Wire)
Galvanized 4.0 mm thick steel wires used as suspenders for Knauf D11 Ceiling System. Knauf hanger wires are fixed to the basic ceiling with the help of ceiling dowels and are connected to the metal grid with the help of Knauf Ankerfix. Recommended for suspension heights up to 2.00m. (Load bearing capacity class = 25 kg.)
Direct Hanger (Universal Bracket)
Accessory used as suspenders for Knauf D11 Ceiling System and adjustable bracket for Knauf W623 Wall Lining System. Attaches to Knauf CD Channels with LN 3,5 screws. Can be cut and bend according to the suspension height. Designed exclusively to be used with Knauf D11 Ceiling System and W623Wall Lining System. (Load bearing capacity class = 40 kg.) Note that sizes above 120 mm cannot be used with Knauf W623 system.
M Connector
Galvanized connector piece used for extending Knauf CD Channels in cases of long spanned ceilings. Designed exclusively to be used with Knauf D11 Ceiling System and W623 Wall Lining System.
Cross Connector
Galvanized clips to connect the main/primary CD channels to the lower/furring CD channels forming the Knauf D112 ceiling grid. Designed exclusively to be used with KnaufD112 Ceiling System
Universal Connector For CD 60X27
Galvanized accessories to connect Knauf CD Channels at intersection points in the Knauf D113 System grid. Two Universal Connectors per-intersection point
Flush Connector For CD 60×27
Galvanized accessories to connect Knauf CD Channels at intersection points in the Knauf D113 System grid for additional measures for fire protection from above. One Flush Connector per intersection point.
